VOXELASE
All free tools

Free Photo to Laser Engraving Converter (Dithering, DPI and Material Presets)

By Es Seddyk Naaoui4 min read

This free converter turns any photo into a laser-ready image in your browser. Set the engraving width and DPI, choose a material preset, adjust the tones, and download a dithered PNG that imports into LightBurn at the exact physical size.

The photo never leaves your computer. All of the processing runs locally in the page, there is no account, and there is no watermark.

Photo to Laser Engraving Converter

Resize a photo to its real engraving size, tune the tones for your material and dither it into a laser-ready PNG. Everything runs in your browser; the photo is never uploaded.

Drop a photo here, or

Your converted image appears here. Dithered previews look grey when scaled to fit; switch to 100% pixels to see the real dots.
The PNG carries its DPI, so LightBurn imports it at the physical size you set. For a dithered file, switch on Pass-Through in the LightBurn image layer so it is engraved as-is and not dithered a second time.

How to convert a photo for laser engraving

  1. Load the photo. Drop a JPG, PNG or WebP on the tool. A sharp, evenly lit photo with a plain background gives the best result. Crop it first if the subject is small in the frame.
  2. Enter the real engraving width in millimetres. The height follows the photo's proportions. Resizing here, before dithering, is the step most people skip. A dithered image that is scaled afterwards turns to mush, because the dots no longer line up with the laser's scan lines.
  3. Set the DPI to match your laser's dot. 254 DPI is a line interval of 0.1 mm and is a sound starting point for most diode and CO₂ machines. The tool shows the line interval for whatever DPI you type.
  4. Pick the material preset. It sets a dithering method and tone curve, and it inverts the image for materials that engrave light.
  5. Adjust brightness, contrast, gamma and sharpening until the face or subject reads clearly at 100% zoom.
  6. Download the PNG and import it into your laser software without resizing it.

Which dithering method should you use?

Dithering replaces shades of grey with a pattern of black and white dots, because most lasers engrave a photo by switching the beam on and off rather than by varying power smoothly. The methods differ in how they spread the dots.

MethodLookUse it for
JarvisSmooth mid-tones, soft grainPortraits and most photos. The default worth trying first.
StuckiSlightly crisper than JarvisPhotos with fine texture such as fur, hair and fabric.
Floyd–SteinbergFine, tight grainHigh-DPI work on glass, tile and anodised aluminium.
AtkinsonHigh contrast, clean highlightsLogos, drawings and photos that look flat with other methods.
Sierra, BurkesBetween Floyd–Steinberg and JarvisAn alternative when Jarvis looks too soft.
Ordered (Bayer)Regular, visible patternA deliberate halftone look, and materials that blur fine dots.
ThresholdPure black and whiteLine art, signatures and text.
GrayscaleNo dotsMachines that modulate power, or dithering later inside LightBurn.

Why are some presets inverted?

Because on some materials the laser leaves a light mark, not a dark one. Wood and leather burn darker where the beam fires, so the image is used as it is. Slate, glass, mirror, cast acrylic and black anodised aluminium do the opposite: the engraved areas turn pale grey, frosted white or bright silver. If you engrave a normal photo on those, you get a negative. The inverted presets flip the image first so the finished piece looks like the original.

The painted white tile preset (often called the Norton method) is not inverted, because the laser fuses the paint into a dark mark on a white tile.

What DPI should you use for photo engraving?

Use the DPI whose line interval roughly equals the width of the dot your laser makes on that material. DPI and line interval are the same setting written two ways: DPI = 25.4 ÷ line interval in millimetres. A 0.1 mm interval is 254 DPI, 0.08 mm is about 318 DPI, and 0.06 mm is about 423 DPI.

Going far above the dot size does not add detail. The dots overlap, dark areas burn into a solid patch and the job takes longer. If the engraving looks muddy, lower the DPI before you touch power or speed. LightBurn's interval test is the quickest way to find the dot size for a given lens and material.

How do you import the result into LightBurn?

Import the PNG, leave its size alone, and switch on Pass-Through in the image layer. The downloaded file stores its DPI, so LightBurn places it at the width you entered. LightBurn's documentation describes Pass-Through as the setting for images that have been pre-processed for laser engraving: the image is engraved as it is, and the line interval is tied to the size of the image. If you leave Pass-Through off and pick a dithering mode in LightBurn as well, the image is dithered twice and loses detail.

If you would rather let LightBurn do the dithering, choose Grayscale in the converter and select Jarvis or Stucki as the image mode in LightBurn. The LightBurn tutorial covers the image layer settings.

Is this a free alternative to Imag-R?

It covers the same core job: resize, tone, sharpen and dither a photo for a specific material. Imag-R is a well-known web app for laser photo preparation with a larger set of material profiles and paid tiers. This converter is deliberately smaller. It has no account, no upload and no usage limit, and it does the processing on your own machine.

When a photo should become a relief instead

Dithering produces a flat, two-tone picture. If the goal is a carved, three-dimensional result (a portrait coin, a relief plaque, a 3D engraving on a fiber laser), the input is a depth map, where brightness means height. That is a different file made a different way. DepthGen Free builds one by hand, and DepthGen Pro generates one from a photo offline.

For the full process, including photo selection and settings by material, read how to laser engrave a photo. Material-specific guidance is in the guides to stone and slate, leather and acrylic.

Sources

Build machine-ready depth maps offline

DepthGen Pro exports 8-bit and 16-bit PNG, EXR, STL and OBJ for laser, CNC and 3D-print workflows.

See pricing

Related reading