Stay on LaserGRBL if you run a GRBL diode laser from a Windows PC and mostly engrave images: it is free, open source and does that job well. Pay for LightBurn when you need a Mac, a controller that is not GRBL, cutting and engraving in one job, built-in design tools, a camera or a rotary.
The two programs are not competing for the same seat. LaserGRBL is a G-code sender with a strong image importer. LightBurn is a layout, editing and control application for several controller families. Every cell in the table below was checked in November 2026 against lasergrbl.com, the LaserGRBL repository and the LightBurn 2.2 documentation.
LaserGRBL vs LightBurn at a glance
| Category | LaserGRBL | LightBurn |
|---|---|---|
| Price model | Free and open source (GPLv3), supported by donations | One-time licence after a 30-day free trial, with one year of updates. Core $99, Pro $199 at the time of writing (November 2026) |
| Platforms | Windows only (XP through 11) | Windows 10 and 11 (64-bit), macOS 13 or later. Linux only up to version 1.7 |
| Controllers and lasers | Grbl v0.9 and v1.1 machines, which covers most hobby diode engravers | Core: GCode (GRBL, grblHAL, FluidNC, Smoothieware, Marlin, xTool). Pro adds DSP (Ruida, Trocen, TopWisdom) and galvo (EZCAD2, EZCAD3, BSL) |
| Design tools | None for drawing. Loads images, G-code and experimental SVG | Shapes, text, node editing, boolean tools, offset, image tracing |
| Image engraving | Line To Line (grayscale by power), 1bit BW dithering, vectorization | Ten image modes including Dither, Jarvis, Stucki and Grayscale, plus 3D Sliced on galvo |
| Cut and engrave in one job | No per-layer or per-colour settings | Yes. Each colour layer has its own mode, speed and power |
| Camera | No | Yes. USB camera for positioning and tracing after calibration and alignment |
| Material library | Material DB with suggested speed and power by laser model | Material Test generator plus a Material Library built from your own results |
| Rotary | No rotary setup. Users rescale the Y axis in Grbl settings | Rotary Setup with Chuck and Roller types |
| Learning curve | Short. A few panels and one import dialog | Longer, with an optional Beginner Mode |
Both are current. LaserGRBL's latest GitHub release at the time of writing is v7.14.1, and LightBurn 2.2 was released on October 19, 2026.
Who should stay on LaserGRBL
LaserGRBL fits a narrow job very well. Keep it if these describe you:
- Your machine runs Grbl firmware and connects to a Windows computer.
- Your work is photos, logos and text supplied as images, engraved on wood, leather, slate or coated metal.
- You are happy to prepare artwork in another program and use the laser software only to convert and send.
- You want software that costs nothing, permanently.
Inside that scope it is well equipped. It previews G-code, converts images three ways, decodes Grbl alarm and error codes, overrides speed and power mid-job on Grbl v1.1, connects over USB or an ESP8266 Wi-Fi bridge, and lets you add custom buttons that run your own G-code, for example to trace a frame or set a new zero.
What can LaserGRBL not do?
It cannot drive non-GRBL controllers, run natively on Mac or Linux, draw or edit artwork, or apply different settings to different parts of one design. The specifics matter when you decide whether you have outgrown it:
- Controllers. The FAQ limits support to engravers that use Grbl as controller firmware. Ruida CO2 machines and galvo fiber lasers are out of scope.
- Vector files. The project describes its SVG support as being in an early state. Size and offset cannot be changed inside LaserGRBL, text must be converted to paths first, filled shapes are not filled (only borders are traced), and there is no separate cut and engrave handling by layer or colour.
- Design. There are no drawing or text tools. Layout happens in Inkscape or another editor.
- Camera and rotary. Neither appears in the feature list or documentation. Rotary users change the Y-axis steps value (
$101) by hand and change it back afterwards. - Z axis. The repository lists minimal Z-axis control as a missing feature, since the program is designed for XY machines.
The common workaround for a cut-plus-engrave project is two jobs: engrave the image, leave the material clamped, then load the outline and cut.
Who should pay for LightBurn
- Mac users. LightBurn 2.2 runs natively on Apple Silicon under macOS 13 or later.
- Owners of CO2 or fiber machines. Ruida, Trocen and TopWisdom DSP controllers and EZCAD2, EZCAD3 and BSL galvo boards need the Pro edition. If you are still choosing hardware, read fiber vs CO2 vs diode lasers first.
- Anyone cutting and engraving in the same file. Colour layers let one project score, fill and cut with different settings in a set order.
- Production work. Camera positioning, Rotary Setup for tumblers, a saved Material Library and a key that activates on three computers all reduce repeat setup.
- Relief engraving on a galvo. 3D Sliced mode carves from a depth map, covered in 8-bit vs 16-bit depth maps in LightBurn.
The trial is the honest test. Thirty days is enough to follow a beginner LightBurn tutorial, run a material test and see whether the extra controls change your results.
Is LightBurn free?
No. LightBurn offers a free 30-day trial with no restrictions, then requires a paid licence key. The licence is a one-time purchase, not a subscription. It includes a year of updates, and the last version released during that year keeps working if you never renew. Core covers GCode machines and Pro covers every supported controller.
Does LaserGRBL work on Mac or Linux?
Not natively. LaserGRBL is a Windows program built on the .NET Framework, and there is no macOS or Linux build. The official FAQ offers workarounds only. On a Mac it suggests trying a Windows emulator, a virtual machine or PlayOnMac. On Linux it points to a PlayOnLinux install script, or Wine 5.0 with Wine Mono 4.9.4.
Treat those as experiments. The project does not promise that the USB serial connection to your engraver will behave under emulation, so test before relying on it for paid work. If a Mac is your main computer, the native options are LightBurn, MeerK40t or, for xTool machines, xTool Studio.
What is the best free alternative to LightBurn?
For a GRBL diode laser on Windows, LaserGRBL. No free program covers everything LightBurn does, so the right alternative depends on the machine.
| Software | Cost | Runs on | Works with | Scope and status |
|---|---|---|---|---|
| LaserGRBL | Free, GPLv3 | Windows | Grbl v0.9 and v1.1 | Image engraving and G-code sending |
| xTool Studio | Free | Windows, macOS | xTool machines | xTool's design and control app. Successor to xTool Creative Space, whose final release was V2.7 in June 2025 |
| MeerK40t | Free, MIT | Windows, macOS, Linux | K40 lasers with Lihuiyu M2/M3 Nano boards, GRBL, Ruida, Moshiboard, NewlyDraw, EZCAD2-compatible JCZ galvo boards | Full design-to-burn program. The project describes itself as in a low-maintenance phase |
| LaserWeb4 | Free, AGPL-3.0 | Windows and macOS builds | Grbl, Smoothieware, TinyG, Marlin | Laser and CNC toolpaths plus machine control. Releases are infrequent |
| Inkscape with the J Tech Photonics Laser Tool | Free, MIT | Inkscape 1.0 or later | G-code machines | Turns SVG paths into G-code. Paths only, and you still need a sender |
| EZCAD2 and EZCAD3 | Supplied with the machine | Windows | JCZ galvo control boards | Stock marking software for galvo lasers. JCZ has stopped updating EZCAD2 and adds new features only to EZCAD3 |
Two patterns stand out. Brand software such as xTool Studio is free but tied to that brand's machines. Open-source options cover more hardware than LaserGRBL but depend on volunteer time, so check recent release activity before building a workflow on one.
How to use LaserGRBL: a first engraving in five steps
1. Connect
Plug in the engraver and check that Windows lists it as a COM port. If it does not, install the CH340 driver, which LaserGRBL offers in its Tools menu. Select the port, set the baud rate (115200 is the most common, some older boards use 57600) and connect. A working link prints a welcome line such as Grbl 1.1 and the status reads Idle. If it reads Alarm, home the machine or press the padlock button to clear it.
2. Open the image and pick a conversion
Choose File, Open File and load a JPG, PNG or BMP. Adjust brightness and contrast, then pick a tool. Line To Line shades by varying laser power and needs a laser that supports power modulation. 1bit BW dithering builds tones from dots and suits materials that either mark or do not, with little in between. Vectorize traces logos and line art. Photo choices are explained in how to laser engrave a photo.
3. Set speed, power and size
The next dialog asks for engraving speed, laser mode, S-MIN, S-MAX, image size in millimetres and an offset. M3 holds power constant. M4 adjusts power to the head's actual speed and requires Grbl v1.1 with laser mode enabled ($32=1). S-MIN is the power for white pixels and normally stays at 0. S-MAX is the power for black pixels, on the scale set by the controller's maximum (commonly 1000, so 800 means 80%). The open-book icon loads suggested values from the material database. Treat them as a starting point.
4. Position and focus
Focus the laser as its manual describes. Jog the head to where the lower-left corner of the image should sit and set that point as zero. Custom buttons are the usual way to add a frame trace and a low-power laser toggle for checking placement.
5. Run, then test properly
Put on eye protection matched to your laser's wavelength, press the green Play button and stay with the machine. Once the first job works, use Generate, Power vs Speed Test to burn a grid on scrap of each material and record the best cell. Too light means more power or less speed. Charred means the opposite.
Migrating from LaserGRBL to LightBurn
- Close LaserGRBL first. Only one program can hold the serial port. Then run Find My Laser in LightBurn and set the origin to front left, with auto-homing off unless the machine has limit switches.
- Match the power scale. Type
$$in LightBurn's Console and read$30. Set S-value max in Device Settings to the same number. LightBurn's troubleshooting guide notes that a mismatch can cut output to about a quarter. - Expect different power behaviour. LaserGRBL defaults to constant power (M3). LightBurn defaults to variable power (M4), which ramps power with speed. To reproduce your old results exactly, turn on Constant Power Mode for the layer. LightBurn recommends variable power for most work.
- Convert your numbers. LaserGRBL speeds are in mm/min, so set LightBurn to the same unit before copying them. An S-MAX of 600 on a 1000 scale becomes 60% power.
- Keep your zeroing habit. Start From set to Current Position with the lower-left Job Origin dot behaves like jogging to a corner in LaserGRBL.
- Re-import the originals. LightBurn imports G-code as geometry only, without speed or power, so bring in the source images and vectors instead.
The practical verdict
LaserGRBL is the right answer more often than its price suggests. For image engraving on a GRBL diode machine under Windows, it is free and sufficient.
LightBurn earns its price at four points: a Mac, a controller LaserGRBL cannot talk to, projects that cut and engrave from one file, and repeat production that benefits from a camera, rotary setup and saved material settings. If none of those applies yet, keep the money and revisit the question when one does.
Sources
- LaserGRBL: Official site and feature list
- LaserGRBL: FAQ
- GitHub: arkypita/LaserGRBL repository
- LaserGRBL: Target Image Options
- LightBurn Documentation: License & FAQs
- LightBurn Documentation: Installing LightBurn
- LightBurn Documentation: Main / Shared Settings
- LightBurn Documentation: GRBL Low Power or No Output
